Why A Good Body Shop Uses A Paint Booth

When you take your car in for service, you expect a great paint job. A high-quality body shop will meet your expectations by delivering a dust-free car with the new color matching the old perfectly. To assure a good job and to comply with environmental regulations, body shops typically perform the painting in a paint booth, use proper equipment and technique, and make sure that their workers wear protective clothing. Some body shops try to skirt these requirements to lower costs and prices, but the results are not worth the so-called "savings."

Why Use A Paint Booth?

There are several good reasons:

Less dust. A body shop generates a significant amount of dust in the process of sanding car parts. Technicians can remove dust from paint by wiping the surface with a tack cloth and then applying several thin coats rather than fewer thick ones. The best way to control dust is to use a paint booth that is:

• Properly vented with filters in place
• Kept at the proper pressure and climate
• Set up so that entrance and exit doors, access doors, and concrete floors are sealed
• Clean and free of unnecessary items, sand, moisture, and dirt
• Closed to unnecessary personnel to prevent traffic in and out
• Manned by a worker in a lint-free painter suit and head covering

Better quality. Equipped with fluorescent lighting attached right outside the booth, the painting technicians can apply a consistent paint job. They can spot flaws or places they missed. Many paint booths are heated for better curing of paints.

Prevents overspray. Proper painting technique assures that paint does not spread to parts of the car not to be painted by masking it to prevent accidental overspray. The paint booth should have a downdraft system with exhaust fans installed in the floor to pull paint particles away from unwanted areas of the vehicle. A downdraft system also sucks up loose, floating dust. Using a properly vented paint booth saves shop owners money on paint, solvents, and supplies.

Contains and reduces toxic fumes . Body shops are moving toward paints and finishes with lower VOC content, but many products contain toxic chemicals that are very harmful to the workers who apply them. They also pose a hazard when they are airborne. A paint booth with proper ventilation through a downdraft, side draft, or cross draft system pulls paints fumes up through high stacks and away from employees, neighboring buildings, and people.

Is safer. A properly designed paint booth uses filters that workers change often to keep the shop in compliance with EPA standards for 98% particulate removal efficiency. It has sprinklers and fire extinguishers in the booth to stop fires and reduce damage to cars and employees. Ideally, the body shop uses a mechanical paint gun washing system that limits technician contact with solvents, reduces solvent usage, and reduces the amount of the VOC and HAP emissions once spray guns are removed from the booth.

Only Trust A Shop With A Paint Booth

Most municipalities require any body shop to have a properly installed paint booth if they use more than a certain number of gallons per week. Some small shops and fly-by-night operators may try to get around the regulations. For best results when you are seeking a body shop, make sure that the shop has a permitted, well-equipped paint booth. Your car, the workers, and the environment will be better for it.

A World Without Money - Interesting, But Something Must Replace It

At some point in the future, probably at some point in the next 50-years, none of us will be using physical money; paper currency or coin. I think we all see the writing on the wall when it comes to this. Now then, let's take it a step further and say; there will be many countries, cultures, and societies that give up the use of money, even digital or electronic money all together. Let's discuss this think tank topic for a moment.

While it is true that a world without money may be more efficient, most other models show it to be less efficient (so far). Some say "Money is the Root of All Evil" and they say humans would not have so many wars, or stealing and thievery if money did not exist - but is that so? Indeed, stealing is inherent in all species. Mammals steal and eat eggs, predators steal babies of other species to eat, birds steal each-others food. If people "own" things that others need they will take it. Organisms do the least to get the most (while preserving energy), viruses hijack cells, bacteria feeds off host, that's how life works. And ethical debts aside, along with risk-reward, selfishness vs. advantages of the herd - there are reasons for all of it, and those roots go back to the building blocks of life itself.

Without money there will still be wars, poverty (if everything is equal, everyone is poor, no incentive for abundance or efficiency). There would still be disease, but if we allow capitalism and abundance to give us the cognitive surplus, we can certainly defeat disease within the human body with focused research. Likewise we will be able to predict and control the weather - order rain for an agricultural region next Monday, Wednesday, and Friday at 5 PM for instance. Many of the things we care about we can fix.

If we get rid of money what about the financial sector; banks, etc. will all those jobs disappear? Well, jobs in banking, insurance, financial planning, will all be eliminated soon with AI, they are as good as gone. Did you also want to give rewards to people who work out, use their brains, learn new things, solve problems, mentor, teach, or run the civilization, it used to take 30% of the people to run the civilization; trash, police, fire, etc. today, only 4% of the people - so what does everyone else do? Frolic around like an episode of Star Trek? Please consider all this.

LED Technology In The Modern Automobile

I was reading an article in a motoring magazine on the dramatic development of the LED and the impact it is having on modern automotive design.

One of the topics of discussion was the wake up call it is giving to the automotive industry. One very important demonstration was at a motor show that had the release of the Jaguar C-XF and while this would not be the first show car to have LED's it was considered one of the most dramatic.

The debut was at the Frankfurt Motor Show and used LED's to provide a very dramatic visual presentation. The display was kicked off by the press of the Jaguars start button.

First was an impressive display, some would say 'explosion', of blue lighting that began with the instrument panel, then flew around the cabin, combining after encompassing the rear seats. Along with this was a burst of more blue projecting itself down from the interior roof lining, at the same time the grille suddenly burst into life with a glow of LED lighting, very impressive.

And to finish the flash of feline impressions (well it is a Jaguar) the headlights had streaks of blue bisecting each of the rectangular elements.

Another leading example of LED technology in the automobile is the Audi R8. If you see one in the daytime you will notice daytime running lights under the main headlights, these are LED lamps. But do not think it stops there as the Audi R8's complete headlamp assembly, including the turn flashers, and the main and dipped beams are LED's.

The LED first made its mark in the automobile at the rear of the vehicle. The 3157 LED and its derivatives found favor with the engineers as brake lamps as they reach full intensity faster than the traditional incandescent bulb. They are now used in many car tail lamps.

And some companies have taken this to the next level. BMW has some that increase in brightness as greater pressure is applied to the brake pedal. Mercedes Benz have the brake lights pulsing quickly when the vehicle is braking heavily.

Technology is allowing today's automobile manufacturers to provide many entertainment and other computer based systems that have the potential to load up the cars power supply. So any device that can assist in reducing the energy consumption has suddenly become very attractive.

This is one of the key drivers that has lifted the LED to the top of the automotive lighting wish list.

This energy saving is not the only driver as one of the other benefits is the life of the bulb. The LED's will outlive the automobiles to which they have been fitted. The owner will never have to replace a light bulb again.

Some of the other benefits include the ability to 'tune' the light so that the light emitted is closer to daylight. Also for automotive designers the constraints on shapes disappear as they are extremely flexible in the shapes that can be achieved. Also the heat generated is a lot less so lightweight plastics hi strength plastics can be used.

Another excellent use of the light emitting diode in the automobile application is the humble traffic light, a brilliant application that ensures we have robust lighting for years to come.

A Birthday Is More Than Balloons - Involving the Kids to Be a Part of the Birthday Decor Prep

Birthday - the only day that a child, no matter how old he is awaits impatiently. At least me, I always warn for the fun and excitement that follows a birthday party. But gone are those days when children used to gather on this special occasion, celebrate the same with a pop and make the day worth to be cherished till their next birthday. Today amidst the hustle of our lives we have left behind those sweet memories of putting on bright dresses, decorating our homes with balloons, mothers baking cakes and other delicacies, lighting candles, arranging fun games and the list goes on and on. With busy work schedules, birthdays in this era have become limited to balloons and a dull, boring, lifeless cake. Cheer up! Gone are those days when balloons decorated with glitters and confetti were the only excitations in a birthday party. Here are a helpful birthday party tricks that kids themselves can work up to fill up their BFF's birthday party with sunshine and rainbows - and other mesmerizing stuffs that costs almost nothing!

1. Abet a theme - Kids can be engaged to abet a theme. In this process some might crave for fantasy of bogie tales like Cinderella, Snow White, Sleeping Beauty and so on. While others will go for avant-garde capacity based on action movies like Frozen and Little Mermaid. Once the apt theme is decided, this can be followed by designing creative masks apt to the theme. A masquerade party - You are sure to end up with a bunch of jaw-dropping guests.

2. Light up your own lamp - What can be more amazing if lighting lights can be replace with DIY night lamps. Colorful papers, a pair of scissors and glue followed by a little creativity is all that is needed. After crafting of night lamps an elder can serve a helping hand with the circuit connections. This is sure to boost up your guests and add a feather to your creative hat!

3. Spice up the party with nature - Flowers are always a love! And when it's a birthday party flowers will absolutely add an extra point to your decoration. No! Not a pot of real flowers - that will fade away with the charm of the party. Kids! Put on your creative boots! You can mimic real flowers using M-seal and some bright glitters. These can be cost effective as well as reusable for other occasions even. Or you can simple awe your guests by using it as an everyday décor item for your house!

4. Gear up with birthday crowns - Birthday hats have been used since ages. It's time that new gen kids bade goodbye to birthday hats and set the trend of something more fashionable - birthday crowns. Wondering how can you create one? As simple as your nursery's ABC. All you need is head bands, hot glue and a packet of plastic alphabets. Make your birthday Champ feel like a true princess with these handmade crowns!

5. Revamp dull cupcakes - Regular boring cupcakes are sure to kill your party's appetite. Revamp these boring cupcakes that is sure to steal the show. Get your hands over colorful icing, and surprise your guests with some really cool cupcake decorations. You can even decorate these cupcakes according to your party theme.

6. Makeover confetti cannons - Confetti cannons are an apple of every child's eye. Why not make these cannons a little more creative and themed to grab the attention of every eye? Wrap up the regular confetti cannons with colorful papers, and decorate the same with glitters or craft works as per your theme.

7. Craft handmade cards - Birthday's without cards are like bread without butter. But why rely on readymade cards? Make your loved ones feel more special by crafting personalized cards. Blow the dust off your creative shells. Your hard work will definitely bare the sweetest fruits ever and draw you much closer to your beloved ones!

Although a grand lavish birthday party sounds royal enough, but this self-crafted birthday bash is sure to draw eyes, and shape up the celebration worth to be cherished forever! Got more ways to engage your little ones shape up a birthday party? You say, we hear! Let us know your jaunty and refreshing ideas that can end the birthday bash with delightful wallets and delightful faces.

Comments: How I Use an Auto Responder to Work From Home

Before Making A Money Transfer Know What The Restrictions Are

Sending money abroad is not as complicated as it was a few decades ago but you should be aware that many Governments worldwide impose restrictions on foreign exchange payments and on possession of foreign currency. These restrictions can apply to local residents or non-residents alike and knowing the local legislation will help you avoid unnecessary complications. Of course, it is hard to be acquainted with the local laws and regulations in detail; therefore, taking a good advice from an expert specializing in money transfers is more than advisable.

Various forms of foreign exchange controls exist but you do not have to know all the details of a particular foreign exchange territory. The important details related to money transfers include: whether a restriction on the amount of currency that is transacted is in force and is there a restriction on who can conduct foreign currency exchange transactions (in some countries only state or government-approved companies can be engaged in the exchange of foreign currency). A stricter form of a foreign exchange control can impose restrictions on the use of possession of foreign currency.

If your money transfer is to be processed by a state-controlled foreign exchange dealer, there is a greater chance to get an unfavourable exchange rate or to be subject to additional fees and commissions. A form of a special currency time is the currency board but the existence of such a monetary authority protects and supports the local currency so it is in advantage to a foreign currency sender in general.

At this stage you must turn to a reputable money transfer specialist who is familiar with the local specifics of the beneficiary's country. Unfortunately, the number of countries where strict exchange controls are in force is constantly changing in the process of globalization and economic liberalization.

Some major countries, which still exercise some kind of foreign exchange controls, include Argentina, Brazil, China, Egypt, India, Malaysia, Morocco, Nigeria, Tunisia and Venezuela. However, this list is large incomplete and you will need to delve into the specific type of foreign currency regime in force for that particular country. Your money transfer expert will provide you with a more populated list of countries and will be able to explain to you all the details related to a certain country.

A complicated situation can occur when a country allows only "reasonable" foreign currency transactions to be connected. "Reasonable" is a flexible term and unless explicitly specified it will be up to a government official or a designated state body to decide what amount of foreign currency money is a "reasonable" sum. Although only a few countries imposes such a restrictive foreign currency regimes, they still exist and you must consider it before sending funds to such a country. Growing number of world governments liberalise foreign currency exchange regulations but taking an expert advice will help you familiarize with all applicable regulations.

The Need for Truck Scales

It's no secret that most of America's goods are transported by truck. Because of this, states have enacted various laws and taxes to regulate the industry. Each state has its own laws on how much a truck can weigh when transporting goods. A common standard for the weight allowed is 34,000 pounds or 15,400 kilograms. The amount of weight carried per axle is called axle weight. The gross weight is the total of all the axles of the truck. Most states receive taxes from the truck weigh stations, which goes to improving the roadways. Trucks that are overweight are subject to heavy fines, which is why there are many high quality truck scales available for companies and contractors.

Truck scales are made out of concrete and steel. They are built to handle a large amount of weight each day all year long. The scales can handle up to 80,000 pounds or 36,000 kilograms per load. The weight is calculated by sensors that receive signals from a junction box. Strain gauges, which are wires are embedded in the concrete and have an electrical current running through them. These wires will compress when pressure from the weight of the truck is sensed. The weight is then displayed on a monitor in a booth where the attendant records the weight. It is vital that these systems are reliable and functioning, because if they are not it will directly affect their pocketbooks.

Another way that is used is called one-axle. In this instance the truck driver needs to place each axle on the truck scales one axel at a time. Once all the axles are weighed a total is given. This takes a lot of time out of the driver's schedule. One stop weighing is where the driver can place the truck on one large scale and the controller will give a gross weight. The one popular method of weighting trucks is when the truck is in motion. The truck does not have to stop at all. The sensors on the truck scales will pick up the weight and record it all while the truck is in motion.

Another reason that a company uses truck scales is because running an over loaded truck all the time would cause more wear on the truck. The engine would have to work harder which means you need to change your oil more often to accommodate the extra stress. Tires would also wear out at a faster pace. Running an over weighted truck is a safety hazard as well as being illegal.

Fines for running an over weighted truck in some states have become much higher. Some fines ran 10 cents a pound for every pound you were over the weight limit, up to a fine of $ 500 per load. Those same states are now charging fines of 12 cents per pound with no limit to the amount of the fine. States are getting tired of trucks running loads that are overweight and ruining their roads and endangering other drivers. The heavy weight of the trucks does enough damage to the roadways at the normal weight. When to many over weighed trucks continuously use their roads it causes repair needs to be done often. The taxes they collect go towards keeping the roads safe for all drivers. So we all have truck scales to thank for not only getting us our goods, but keeping us safe as well!